Thin Slab Metal Deck Anchor

Benefits of Thin Slab Metal Deck Anchor:

• Preset your post anchors
• Prevent structural damage to Q deck (thin slabs) – no chipping, grinding, burning, or cutting
• Follows compliance for new regulations and contract stipulations.
• Comes with a CSI certification and PE Engineering Stamp

A perfect solution to a costly problem: All temporary exterior elevators need a guard rail. When these exterior elevators are removed, there is a need for a new guardrail. Instead of chiseling and breaking your Q deck (thin slabs) simply preset your post anchors and thread mount your new rails.

In other words, avoid an expensive mistake where you have to chip, grind, burn, or cut your Q deck (thin slab) in order to put up a new guardrail.

The SAPS metal deck series is available for 5” thin slab metal decks with a minimum 20 gauge substrate. Installs with #14 TEK screws.
PDF Spec Sheet