sap42df Archives » Safety Anchor Post System https://safetyanchorpost.com/product-tag/sap42df/ Temporary Guardrails Thu, 18 Jan 2024 14:56:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://safetyanchorpost.com/wp-content/uploads/2023/11/cropped-favicon-32x32.png sap42df Archives » Safety Anchor Post System https://safetyanchorpost.com/product-tag/sap42df/ 32 32 227644155 SAP42DF – For Existing Structures https://safetyanchorpost.com/products/sap42df/ https://safetyanchorpost.com/products/sap42df/#respond Sat, 25 Nov 2023 10:40:20 +0000 https://safetyanchorpost.com/?post_type=product&p=15751 The SAP42DF guardrail is engineered for existing concrete structures and provides a 5000 lb point of tie-off. Meets OSHA height requirements. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time.

  • Meets ANSI Z359.18-2017 Safety Requirements for Anchorage Connectors for Active Fall Protection Systems
  • Meets ANSI Z359.14-2021 For Tie Off Above and Below the Dorsal D-Ring
  • Toeboard is built into the unit.
  • 4 x 3/8” HD Titan Concrete Anchors are sold separately.

PDF Spec Sheet

The post SAP42DF – For Existing Structures appeared first on Safety Anchor Post System.

]]> SAP42DF – FOR EXISTING STRUCTURES

Installation: Drill (4) holes to match holes on the baseplate, and then fasten with (4) 4 x 3/8” HD Titan Concrete Anchors.

Features Include:

  • 5k LB Dedicated Point of Tie Off
  • Built-in toe board
  • Vise clamping
  • Braced base plate for maximum support.
  • SAP42DF meets OSHA height requirements.
  • No side loading.
  • Rotates 360 degrees.
  • Is compliant for active fall restraint and passive fall restraint.
  • Can be used on thinner slabs (as thin as 6 inches).
  • Does not spall.

SYMBOL LEGEND

C=Corner
D=D–Ring
SAP=Safety Anchor Post

The post SAP42DF – For Existing Structures appeared first on Safety Anchor Post System.

]]> https://safetyanchorpost.com/products/sap42df/feed/ 0 15751