4 x 3/8” HD Titan Concrete Anchors | 50pcs
$92.50(50) 4 x 3/8” HD Titan Concrete Anchors.
Features:
- Speed threads
- Reusable
CLT3 Anchor
$32.65BUILT FOR CROSS-LAMINATED TIMBER CONSTRUCTION & STEEL STRUCTURES
- Fire Topping Utilizes (8) standard 3-inch wood screws
- Cross-Laminated Timber Construction 3-Inch Fire Stop Concrete
- Welded on secure and reliable attachment point for Structural Steel Construction
- Requires (4) 1-inch stitch weld for Structural Steel Construction
CRAFTED WITH SUSTAINABILITY AND REUSABILITY IN MIND
The CLT3 Anchor is reusable, unlike angle iron stanchions.
View Cross Laminated Timber PDF for More Info:
SAP18D PRESLAB METAL DECK TIE–OFF
$522.00Benefits:
- Significantly less expensive. Roughly one tenth of the price of portable water cart anchors.
- Avoid the liability of crushing the Q deck with heavy portable water cart anchors.
- Lighter to transport compared to a water cart anchor. Water cart anchors weigh thousands of pounds while our anchor is under 20 pounds.
- Screws directly into a Q Deck that has no concrete.
Compare the Cost: The alternative which is a Water Cart Anchor will cost you $5,000+ per cart. Our anchor only costs $450.
A perfect solution to a common warehouse sky light installation/openings problem: Most warehouse builds utilize sky lights. Whoever is installing these sky lights needs a tie off. This anchor screws directly into a Q Deck that has no concrete.
Save money, save time, be compliant.
SAPS Dualie Anchor
$35.38CALL FOR PRICING (800) 377–1632 (typically starting at $35.38 per unit)
Does not come with D Rings or Whiskers.
The SAPS Dualie Anchor® embeds directly into a concrete slab. Available in 5 inch through 24 inch heights to match any slab depth. Use a SAPS guardrail along with a swivel d-ring on the ceiling below. The SAPS Dualie Anchor® can also be embedded directly into a concrete wall and used with up to (2) swivel d-rings at the same time.
PDF Spec Sheet
SAPS Lower Backstay + Foot
$57.85The SAPS Upper Backstay replacement part is used to replace the kicker brace on the SAP42DM.
Features Include:
- Adjustable turnbuckle
- 1x Backstay base plate (foot)
- 1x Lower backstay arm
- 1x Bolt included
SAPS Spider Anchor
$14.69The SAPS Spider Anchor embeds directly into a concrete slab. It is used with a SAPS guardrail. The SAPS Spider Anchor is available in 6″ through 24″ heights to match any slab depth.
SAPS Upper Backstay + Foot
$72.50The SAPS Upper Backstay replacement part is used to replace the kicker brace on the SAP42DM.
Features Include:
- Adjustable turnbuckle
- 1x Backstay base plate (foot)
- 1x Upper backstay arm
- 1x Bolt included
Thin Slab Metal Deck Anchor
$21.46Benefits of Thin Slab Metal Deck Anchor:
- Preset your post anchors
- Prevent structural damage to Q deck (thin slabs) – no chipping, grinding, burning, or cutting
- Follows compliance for new regulations and contract stipulations.
- Comes with a CSI certification and PE Engineering Stamp
A perfect solution to a costly problem: All temporary exterior elevators need a guard rail. When these exterior elevators are removed, there is a need for a new guardrail. Instead of chiseling and breaking your Q deck (thin slabs) simply preset your post anchors and thread mount your new rails.
In other words, avoid an expensive mistake where you have to chip, grind, burn, or cut your Q deck (thin slab) in order to put up a new guardrail.
The SAPS metal deck series is available for 5” thin slab metal decks with a minimum 20 gauge substrate. Installs with #14 TEK screws.
PDF Spec Sheet
Whisker Set Plugs 100pcs
$350.00Benefits of the Whisker Set Plug:
- Quickly identify the center of the spider anchor once encased in concrete.
- They are reusable
- High visibility
Solution to a common problem: The original patented spider anchor with antenna plug, tends to get buried in concrete once encased. Then the contractor is required to bring an electric chisel to dig it out.
In other words, this prevents you having to spend time and resources digging out a buried spider anchor.
Did you know when a contractor loses an anchor it could take 2+ hours in finding it and digging it out? This can quickly become an expensive repetitive problem. The whisker set plug solves this issue.