SAPS Guardrails are installed unlike any other handrail system on the market today. SAPS fall arrest anchoring system has a unique design that leads to lower labor costs at installation and removal. The SAPS product line provides solutions for both concrete and structural steel construction.

Showing 1–12 of 16 results

Breaker Bar

$125.00

The official tool for breaking and loosening all Safety Anchor Posts.

SAP18D

$225.00

The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 LB point of tie-off. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Installs in under a minute without the need for any tools.

Features Include:

  • 5k LB Dedicated Point of Tie Off
  • Easily Portable – Smaller than standard fire extinguisher
  • Braced base plate for maximum support.
  • No side loading.
  • Rotates 360 degrees.
  • Is compliant for active fall restraint.

PDF Spec Sheet

SAP18D PRESLAB METAL DECK TIE–OFF

$450.00

Benefits:

  • Significantly less expensive. Roughly one tenth of the price of portable water cart anchors.
  • Avoid the liability of crushing the Q deck with heavy portable water cart anchors.
  • Lighter to transport compared to a water cart anchor. Water cart anchors weigh thousands of pounds while our anchor is under 20 pounds.
  • Screws directly into a Q Deck  that has no concrete.

Compare the Cost: The alternative which is a Water Cart Anchor will cost you $5,000+ per cart. Our anchor only costs $450.

A perfect solution to a common warehouse sky light installation/openings problem: Most warehouse builds utilize sky lights. Whoever is installing these sky lights needs a tie off. This anchor screws directly into a Q Deck that has no concrete.

Save money, save time, be compliant.

SAP21D

$250.00

The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 LB point of tie-off. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Installs in under a minute without the need for any tools.

Features Include:

  • 5k LB Dedicated Point of Tie Off
  • Easily Portable – Size of standard fire extinguisher
  • Rotatable rail member brackets w/vise clamping
  • Braced base plate for maximum support.
  • No side loading.
  • Rotates 360 degrees.
  • Is compliant for active fall restraint.

PDF Spec Sheet

SAP42D

$280.00

The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 LB point of tie-off. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Installs in under a minute without the need for any tools.

Features Include:

  • Meets ANSI Z359.18-2017 Safety Requirements for Anchorage Connectors for Active Fall Protection Systems
  • Meets ANSI Z359.14-2021 For Tie Off Above and Below the Dorsal D-Ring
  • 5k LB Dedicated Point of Tie Off
  • Rotatable rail member brackets w/vise clamping
  • Braced base plate for maximum support.
  • SAP42D meets OSHA height requirements.
  • No side loading.
  • Rotates 360 degrees.
  • Is compliant for active fall restraint and passive fall restraint.

SAP42DEX

$290.00

The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 LB point of tie-off. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Installs in under a minute without the need for any tools.

Features Include:

  • Removable coil rod (SAP42DEX Exclusive Feature)
  • Panel attachment (SAP42DEX Exclusive Feature)
  • Surface thread mount on existing structure (SAP42DEX Exclusive Feature)
  • Meets ANSI Z359.18-2017 Safety Requirements for Anchorage Connectors for Active Fall Protection Systems
  • Meets ANSI Z359.14-2021 For Tie Off Above and Below the Dorsal D-Ring
  • 5k LB Dedicated Point of Tie Off
  • Rotatable rail member brackets w/vise clamping
  • Braced base plate for maximum support.
  • SAP42D meets OSHA height requirements.
  • No side loading.
  • Rotates 360 degrees.
  • Is compliant for active fall restraint and passive fall restraint.

SAP42DEX with 10 (inch) 5-Holes Toeboard Rental

Rent for $22.50

SAPS42DEX with 10″ 5-hole toeboard plates are installed between the anchor and post. The 10″ 5-hole toeboard is used with SAPS Concrete Series guardrails from 21″ through 42″ tall.

Comes with: SAP42DEX, 10 inch 5-hole Toeboard, Coil Rod, (2) Washer Plates, (2) 1/2″ Bolts .

Rent by month (28 day cycle) – $22.50 per month per unit

Customer pays for transportation. Customers may self-pick and deliver.

SAP42DF – For Existing Structures

$270.00

The SAP42DF guardrail is engineered for existing concrete structures and provides a 5000 lb point of tie-off. Meets OSHA height requirements. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time.

  • Meets ANSI Z359.18-2017 Safety Requirements for Anchorage Connectors for Active Fall Protection Systems
  • Meets ANSI Z359.14-2021 For Tie Off Above and Below the Dorsal D-Ring
  • Toeboard is built into the unit.
  • 4 x 3/8” HD Titan Concrete Anchors are sold separately.

PDF Spec Sheet

SAP42DM Wire Rope Design

$260.00

The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 LB point of tie-off. Made in the United States with heavy-duty steel, this guardrail system can be reused over time.

Features Include:

  • Meets ANSI Z359.18-2017 Safety Requirements for Anchorage Connectors for Active Fall Protection Systems
  • Meets ANSI Z359.14-2021 For Tie Off Above and Below the Dorsal D-Ring
  • 5k LB Dedicated Point of Tie Off
  • Rotatable rail member with wire rope sleeve
  • Braced base plate for maximum support.
  • SAP42DM meets OSHA height requirements.
  • No side loading.
  • Rotates 360 degrees.
  • Is compliant for active fall restraint and passive fall restraint.
  • 100% reusable, unlike the traditional angle iron currently used.

PDF Spec Sheet

SAP42DM Wire Rope Design Complete Set

$502.00

The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 LB point of tie-off. Made in the United States with heavy-duty steel, this guardrail system can be reused over time.

The complete set includes everything you need:

  • SAP42DM included
  • 10″ Toeboard included
  • 4x Backstay arms (turnbuckles) included
  • 2x Detachable collar clamps included; each collar clamp holds 2 backstay arms
  • 4x Backstay base plates included

Benefits of Safety Anchor Post Wire Rope System, unlike “wood,” never deteriorates and never needs adjustment.

Saps Guardrail | Concrete – Fixed Panel Barrier Complete System

$933.00

The SAPS Fixed Panel Barrier System is a perimeter guardrail system engineered to eliminate all wood. The system is comprised of a wire mesh panel that is supported by two SAP42DP posts and two U-channel toeboards. The U-channel toeboard allows the panels to slide and overlap to configure a desired span. The system does not require any gates, as all of the panels are removable. The system can be used with Spider Anchors or Dualie Anchors.

Everything needed for the Fixed Panel Barrier System is included.